.. This work is licensed under a Creative Commons Attribution 4.0 International License. .. SPDX-License-Identifier: CC-BY-4.0 .. Copyright (C) 2021-2024 Wind River Systems, Inc. Installation Guide ================== .. contents:: :depth: 3 :local: Abstract -------- This document describes how to install INF O2 service over the O-RAN INF platform. The audience of this document is assumed to have basic knowledge of kubernetes CLI, and helm chart cli. Preface ------- In the context of hosting a RAN Application on INF, the O-RAN O2 Application provides and exposes the IMS and DMS service APIs of the O2 interface between the O-Cloud (INF) and the Service Management & Orchestration (SMO), in the O-RAN Architecture. The O2 interfaces enable the management of the O-Cloud (INF) infrastructure and the deployment life-cycle management of O-RAN cloudified NFs that run on O-Cloud (INF). See `O-RAN O2 General Aspects and Principles `__, and `INF O2 documentation `__. The O-RAN O2 application is integrated into INF as a system application. The O-RAN O2 application package is saved in INF during system installation, but it is not applied by default. System administrators can follow the procedures below to install and uninstall the O-RAN O2 application. INF O2 Service Install ====================== 1. Prerequisites ---------------- Configure the internal Ceph storage for the O2 application persistent storage, see INF Storage Configuration and Management: `Configure the Internal Ceph Storage Backend `__. Enable PVC support in ``oran-o2`` namespace, see INF Storage Configuration and Management: `Enable ReadWriteOnce PVC Support in Additional Namespaces `__. Set up an OAuth 2.0 server and configure it to use either JWT with Shared Key or Token Introspection. Since the J-release, OAuth2 has been mandatory when starting the O2 application. 2. Procedure ------------ You can install O-RAN O2 application on INF from the command line. 1. Locate the O2 application tarball in ``/usr/local/share/applications/helm``. For example: :: /usr/local/share/applications/helm/oran-o2-.tgz 2. Download ``admin_openrc.sh`` from the INF admin dashboard. - Visit http://put_your_OAM_IP_here:8080/project/api_access/ - Click the **Download OpenStack RC File”/”OpenStack RC File** button 3. Copy the file to the controller host. 4. Source the platform environment. :: $ source ./admin_openrc.sh ~(keystone_admin)]$ 5. Upload the application. :: ~(keystone_admin)]$ system application-upload /usr/local/share/applications/helm/oran-o2-.tgz 6. Prepare the override ``yaml`` file. a. Create a client on the OAuth Server. Create a client on OAuth Server to provide O2 application with access permission credentials. Here is a reference 3rd-party OAuth Server (`Keycloak `__) :: docker run \ --name keycloak \ -p 8080:8080 \ -e KEYCLOAK_ADMIN=admin \ -e KEYCLOAK_ADMIN_PASSWORD=admin \ -e KC_HOSTNAME=localhost \ quay.io/keycloak/keycloak:latest \ start-dev docker exec -it keycloak /bin/bash bash-5.1$ cd /opt/keycloak/bin bash-5.1$ ./kcadm.sh config credentials --server http://localhost:8080 --realm master --user admin bash-5.1$ ./kcadm.sh update realms/master -s sslRequired=NONE When you create a client, you will get a client ID and client secret. :: OAUTH2_TOKEN_ENDPOINT=http://<3rd-party OAuth Server Address>:8080/realms/master/protocol/openid-connect/token OAUTH2_CLIENT_ID= OAUTH2_CLIENT_SECRET= b. Prepare the OAuth2 variables for authenticate information. When using JWT with Shared Key, the following attributes need to be configured. Here's an example for preparation: :: OAUTH2_ALGORITHM=RS256 OAUTH2_PUB_KEY=<3rd-party OAuth Server Public Key> For Token Introspection, here are examples of the required preparation: :: OAUTH2_INTROSPECTION_ENDPOINT=http://<3rd-party OAuth Server Address>:8080/realms/master/protocol/openid-connect/token/introspect OAUTH2_CLIENT_ID= OAUTH2_CLIENT_SECRET= c. Create certificates for the O2 service. Obtain an intermediate or Root CA-signed certificate and key from a trusted intermediate or Root Certificate Authority (CA). Refer to the documentation for the external Root CA that you are using on how to create a public certificate and private key pairs signed by an intermediate or Root CA for HTTPS. For lab purposes, see INF Security: `Create Certificates Locally using openssl `__ to create an Intermediate or test Root CA certificate and key, and use it to locally sign test certificates. The resulting files, from either an external CA or locally generated for the lab with openssl, should be: - Local CA certificate - ``my-root-ca-cert.pem`` - Server certificate - ``my-server-cert.pem`` - Server key - ``my-server-key.pem`` .. **Note** If using a server certificate signed by a local CA (i.e. lab scenario above), this local CA certificate (e.g. my-root-ca-cert.pem from lab scenario above) must be shared with the SMO application for the O2 server certificate verification. d. Prepare the O2 service application configuration file. As per the Cloudification and Orchestration use case defined in O-RAN Working Group 6, the following information should be generated by SMO: - O-Cloud Gload ID - ``OCLOUD_GLOBAL_ID`` - SMO Register URL - ``SMO_REGISTER_URL`` See `O-RAN Cloudification and Orchestration Use Cases and Requirements for O-RAN Virtualized RAN `__. :: API_HOST_EXTERNAL_FLOATING=$(echo ${OS_AUTH_URL} | awk -F / '{print $3}' | cut -d: -f1) cat < app.conf [DEFAULT] ocloud_global_id = ${OCLOUD_GLOBAL_ID} smo_register_url = ${SMO_REGISTER_URL} [OCLOUD] OS_AUTH_URL = ${OS_AUTH_URL} OS_USERNAME = ${OS_USERNAME} OS_PASSWORD = ${OS_PASSWORD} API_HOST_EXTERNAL_FLOATING = ${API_HOST_EXTERNAL_FLOATING} [OAUTH2] oauth2_verify_type = jwt oauth2_public_key = ${OAUTH2_PUB_KEY} oauth2_algorithm = ${OAUTH2_ALGORITHM} # required if oauth2_verify_type = introspection #oauth2_verify_type = introspection #oauth2_introspection_endpoint = ${OAUTH2_INTROSPECTION_ENDPOINT} #oauth2_client_id = ${OAUTH2_CLIENT_ID} #oauth2_client_secret = ${OAUTH2_CLIENT_SECRET} [API] [WATCHER] [PUBSUB] EOF e. Retrieve the CA certificate from your SMO vendor. If the SMO application provides service via HTTPS, and the server certificate is self-signed, the CA certficate should be retrieved from the SMO. This procedure assumes that the name of the certificate is ``smo-ca.pem`` f. Prepare client certificate for mTLS (Mutual TLS). When you request the O2 application from SMO, it needs the certificate for mTLS. We assume you have the CA certificate and CA key of the SMO client, you can follow the guide to generate the client certficate. :: openssl genrsa -out client-key.pem 2048 openssl req -new -key client-key.pem -out client.csr openssl x509 -req -in client.csr -CA smo-ca.pem -CAkey smo-ca-key.pem -CAcreateserial -out client-cert.pem -days 365 j. Populate the override yaml file. Refer to the previous step for the required override values. :: APPLICATION_CONFIG=$(base64 app.conf -w 0) SERVER_CERT=$(base64 my-server-cert.pem -w 0) SERVER_KEY=$(base64 my-server-key.pem -w 0) SMO_CA_CERT=$(base64 smo-ca.pem -w 0) cat < o2service-override.yaml applicationconfig: ${APPLICATION_CONFIG} servercrt: ${SERVER_CERT} serverkey: ${SERVER_KEY} smocacrt: ${SMO_CA_CERT} EOF To deploy other versions of an image required for a quick solution, to have early access to the features (eg. oranscinf/pti-o2imsdms:2.0.3), and to authenticate images that are hosted by a private registry, follow the steps below: 1. Create a docker-registry secret in ``oran-o2`` namespace. :: export O2SERVICE_IMAGE_REG= kubectl create secret docker-registry private-registry-key \ --docker-server=${O2SERVICE_IMAGE_REG} --docker-username=${USERNAME} \ --docker-password=${PASSWORD} -n oran-o2 2. Refer to the ``imagePullSecrets`` in override file. :: cat < o2service-override.yaml imagePullSecrets: - private-registry-key o2ims: serviceaccountname: admin-oran-o2 images: tags: o2service: ${O2SERVICE_IMAGE_REG}/docker.io/oranscinf/pti-o2imsdms:2.0.3 postgres: ${O2SERVICE_IMAGE_REG}/docker.io/library/postgres:9.6 redis: ${O2SERVICE_IMAGE_REG}/docker.io/library/redis:alpine pullPolicy: IfNotPresent logginglevel: "DEBUG" useHostCert: true applicationconfig: ${APPLICATION_CONFIG} servercrt: ${SERVER_CERT} serverkey: ${SERVER_KEY} smocacrt: ${SMO_CA_CERT} EOF 7. Update the overrides for the oran-o2 application. :: ~(keystone_admin)]$ system helm-override-update oran-o2 oran-o2 oran-o2 --values o2service-override.yaml # Check the overrides ~(keystone_admin)]$ system helm-override-show oran-o2 oran-o2 oran-o2 8. Run the **system application-apply** command to apply the updates. :: ~(keystone_admin)]$ system application-apply oran-o2 9. Monitor the status using the command below. :: ~(keystone_admin)]$ watch -n 5 system application-list OR :: ~(keystone_admin)]$ watch kubectl get all -n oran-o2 3. Results ---------- You have launched services in the above namespace. 4. Postrequisites ----------------- You will need to integrate INF with an SMO application that performs management of O-Cloud infrastructure and the deployment life cycle management of O-RAN cloudified NFs. See the following API reference for details: - `API O-RAN O2 interface `__ INF O2 Service Uninstall ======================== .. _procedure-1: 1. Procedure ------------ You can uninstall the O-RAN O2 application on INF from the command line. 1. Uninstall the application. Remove O2 application related resources. :: ~(keystone_admin)]$ system application-remove oran-o2 2. Delete the application. Remove the uninstalled O2 application’s definition, including the manifest and helm charts and helm chart overrides, from the system. :: ~(keystone_admin)]$ system application-delete oran-o2 .. _results-1: 2. Results ---------- You have uninstalled the O2 application from the system.